dt_ctrl.ctrl 26.5 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
#	dt_ctrl.ctrl
#
#	Controller network for Dwingeloo Telescope.
#
#	This file contains the fixed part of the network and its parameters.
#	Other .ctrl files are used for those parts which are conditional,
#	such as the use of simulation networks or real servo drives.
#

# Frequency is limited by the stoeber drives.
Jeroen Vreeken's avatar
Jeroen Vreeken committed
11
12
frequency 250

13
14
15
16
17
# dt_ctrl_el.ctrl	Elevation with real servo drives
# dt_ctrl_el_sim.ctrl	Elevation with simulated network
# dt_ctrl_az.ctrl	Azimuth with real servo drives
# dt_ctrl_az_sim.ctrl	Azimuth with simulated network
#
18
19
20
21
22
23
24
25
26
# Uncomment either the real network, or the sim network.
# But never both!

#include "dt_ctrl_el.ctrl"
include "dt_ctrl_el_sim.ctrl"

#include "dt_ctrl_az.ctrl"
include "dt_ctrl_az_sim.ctrl"

27

Jeroen Vreeken's avatar
Jeroen Vreeken committed
28
blocks {
29
	{ "setpoint_generator", "azimuth_spg", 			"Azimuth_Setpoint", "rad" }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
	{ "servo_state",        "azimuth_servo_state"              }
	{ "subtract",	        "azimuth_setpoint_error"	   }
	{ "subtract",	        "azimuth_error"			   }
	{ "pid_aw",	        "azimuth_pid"			   }
	{ "filter_iir",	        "azimuth_pid_filter"		   }
	{ "limit_var",	        "azimuth_pid_limit"		   }
	{ "add",  	        "azimuth_speed_ff" 		   }
	{ "limit",	        "azimuth_speed_limit"		   }
	{ "dt_az_safety",       "azimuth_safety"		   }
	{ "gain", 	        "azimuth_speed_servo"		   }
	{ "value",	        "azimuth_torque"		   }
	{ "value",	        "azimuth_position_offset"  	   }
	{ "add",  	        "azimuth_position_offset_sum"	   }
	{ "gain", 	        "azimuth_position_gain"		   }
	
	{ "matrix_2x2",	        "elevation_input_matrix"	   }
46
	{ "setpoint_generator", "elevation_spg", 		"Elevation_Setpoint", "rad" }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
47
	{ "servo_state",        "elevation_servo_state"            }
48
	{ "setpoint_generator", "elevation_torsion_spg",	"Elevation_Torsion_Setpoint", "rad" }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
49
50
51
52
	{ "subtract",	        "elevation_setpoint_error" 	   }
	{ "subtract",  	        "elevation_error"  		   }
	{ "subtract",	        "elevation_torsion_error"  	   }
	{ "subtract",	        "elevation_torsion_setpoint_error" }
53
	{ "subtract",	        "elevation_torsion_torque" 	   }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
54
55
	{ "filter_lp",	        "elevation_torsion_torque_lp"	   }
	{ "pid_aw",	        "elevation_pid"			   }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
56
	{ "pid_aw",  	        "elevation_torsion_pid"		   }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
57
58
59
60
61
62
63
64
65
66
67
68
69
	{ "add",  	        "elevation_speed_ff"		   }
	{ "switch",             "elevation_position_switch"        }
	{ "limit",	        "elevation_torsion_speed_limit"	   }
	{ "limit",	        "elevation_speed_limit"		   }
	{ "limit_2nd",	        "elevation_jerk_limit"		   }
	{ "dt_el_safety",       "elevation_safety" 		   }
	{ "matrix_2x2",	        "elevation_output_matrix"  	   }
	{ "value",	        "elevation_torque_r"		   }
	{ "value",	        "elevation_torque_l"		   }
	{ "value",	        "elevation_position_offset_r"      }
	{ "value",	        "elevation_position_offset_l"	   }
	{ "add",  	        "elevation_position_offset_r_sum"  }
	{ "add",  	        "elevation_position_offset_l_sum"  }
70
71

	{ "value_bool", 	"false"	}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
72
73
74
75
76
77
78
79
}

links {
	{ "dt_az",                          "position",   "azimuth_position_gain",            "in"           , true }
	{ "azimuth_position_gain",          "out",        "azimuth_position_offset_sum",      "in0"          , true }
	{ "azimuth_position_offset",        "value",      "azimuth_position_offset_sum",      "in1"          , true }
	{ "azimuth_position_offset_sum",    "out",        "azimuth_error",                    "negative"     , true }
	{ "azimuth_servo_state",            "reset",      "azimuth_spg",                      "reset"        , false }
80
	{ "azimuth_position_offset_sum",    "out",        "azimuth_spg",                      "reset_x"      , true }
81
82
83
	{ "azimuth_spg",                    "x",          "azimuth_servo_state",              "spg_x"        , true }
	{ "azimuth_spg",                    "v",          "azimuth_servo_state",              "spg_v"        , true }
	{ "azimuth_spg",                    "a",          "azimuth_servo_state",              "spg_a"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
84
	{ "azimuth_safety",                 "safe_out",   "azimuth_servo_state",              "safe"         , false }
85
	{ "azimuth_servo_state",            "out_x",      "azimuth_error",                    "positive"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
86
87
	{ "azimuth_position_offset_sum",    "out",        "azimuth_setpoint_error",           "negative"     , true }
	{ "azimuth_spg",                    "setpoint",   "azimuth_setpoint_error",           "positive"     , true }
88
	{ "azimuth_servo_state",            "out_v",      "azimuth_speed_ff",                 "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
89
90
91
	{ "azimuth_error",                  "difference", "azimuth_pid",                      "in"           , true }
	{ "azimuth_servo_state",            "enable",     "azimuth_pid",                      "enable"       , true }
	{ "azimuth_pid",                    "out",        "azimuth_pid_limit",                "in"           , true }
92
	{ "azimuth_servo_state",            "out_v",      "azimuth_pid_limit",                "limit"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
93
94
95
96
97
98
	{ "azimuth_pid_limit",              "out",        "azimuth_pid_filter",               "in"           , true }
	{ "azimuth_pid_filter",             "out",        "azimuth_speed_ff",                 "in1"          , true }
	{ "azimuth_speed_ff",               "out",        "azimuth_speed_limit",              "in"           , true }
	{ "azimuth_speed_limit",            "out",        "azimuth_safety",                   "speed_in"     , true }
	{ "azimuth_position_offset_sum",    "out",        "azimuth_safety",                   "position_in"  , true }
	{ "azimuth_torque",                 "value",      "azimuth_safety",                   "torque_in"    , true }
99
100
	{ "dt_az",                          "be4",        "azimuth_safety",                   "safety_in_positive", true }
	{ "dt_az",                          "be2",        "azimuth_safety",                   "safety_in_negative", true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
101
102
103
104
105
	{ "azimuth_servo_state",            "enable",     "azimuth_safety",                   "enable"       , true }
        { "azimuth_safety",                 "speed_out",  "azimuth_speed_servo",              "in"           , true }
	{ "azimuth_speed_servo",            "out",        "dt_az",                            "speed"        , true }
	{ "azimuth_safety",                 "torque_out", "dt_az",                            "torque"       , true }
	{ "azimuth_servo_state",            "enable",     "dt_az",                            "enable"       , true }
106
107
	{ "false",                          "value",      "dt_az",                            "ba1"          , true }
	{ "false",			    "value",      "dt_az",                            "ba2"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
108
109

	{ "elevation_servo_state",          "reset",      "elevation_spg",                    "reset"        , false }
110
	{ "elevation_input_matrix",         "out0",       "elevation_spg",                    "reset_x"      , true }
111
112
113
	{ "elevation_spg",                  "x",          "elevation_servo_state",            "spg_x"        , true }
	{ "elevation_spg",                  "v",          "elevation_servo_state",            "spg_v"        , true }
	{ "elevation_spg",                  "a",          "elevation_servo_state",            "spg_a"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
114
	{ "elevation_safety",               "safe_out",   "elevation_servo_state",            "safe"         , false }
115
116
	{ "elevation_servo_state",          "out_x",      "elevation_error",                  "positive"     , true }
	{ "elevation_servo_state",          "out_v",      "elevation_speed_ff",               "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
117
118
	{ "dt_el_r",                        "position",   "elevation_position_offset_r_sum",  "in0"          , true }
	{ "dt_el_l",                        "position",   "elevation_position_offset_l_sum",  "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
	{ "elevation_position_offset_r",    "value",      "elevation_position_offset_r_sum",  "in1"          , true }
	{ "elevation_position_offset_l",    "value",      "elevation_position_offset_l_sum",  "in1"          , true }
	{ "elevation_position_offset_r_sum","out",        "elevation_input_matrix",           "in0"          , true }
	{ "elevation_position_offset_l_sum","out",        "elevation_input_matrix",           "in1"          , true }
	{ "elevation_input_matrix",         "out0",       "elevation_error",                  "negative"     , true }
	{ "elevation_spg",                  "setpoint",   "elevation_setpoint_error",         "positive"     , true }
	{ "elevation_input_matrix",         "out0",       "elevation_setpoint_error",         "negative"     , true }
	{ "elevation_error",                "difference", "elevation_pid",                    "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_pid",                    "enable"       , true }
	{ "elevation_pid",                  "out",        "elevation_speed_ff",               "in1"          , true }
	{ "elevation_speed_ff",             "out",        "elevation_position_switch",        "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_position_switch",        "on"           , true }
	{ "elevation_position_switch",      "out",        "elevation_speed_limit",            "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_jerk_limit",             "enable"       , true }
	{ "elevation_speed_limit",          "out",        "elevation_jerk_limit",             "in"           , true }
	{ "elevation_jerk_limit",           "out",        "elevation_output_matrix",          "in0"          , true }
135
136
137
	{ "dt_el_r",                        "torque",     "elevation_torsion_torque",         "positive"     , true }
	{ "dt_el_l",                        "torque",     "elevation_torsion_torque",         "negative"     , true }
	{ "elevation_torsion_torque",       "difference", "elevation_torsion_torque_lp",      "in"           , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
138
139
	{ "elevation_position_offset_r_sum","out",        "elevation_safety",                 "position_in_r" , true }
	{ "elevation_position_offset_l_sum","out",        "elevation_safety",                 "position_in_l" , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
140
	{ "elevation_input_matrix",         "out1",       "elevation_safety",                 "torsion_in"   , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
141
142
	{ "elevation_output_matrix",        "out0",       "elevation_safety",                 "speed_in_r"    , true }
	{ "elevation_output_matrix",        "out1",       "elevation_safety",                 "speed_in_l"    , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
143
	{ "elevation_torsion_torque_lp",    "out",        "elevation_safety",                 "torque_in"    , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
144
145
	{ "elevation_torque_r",             "value",      "elevation_safety",                 "torque_in_r"   , true }
	{ "elevation_torque_l",             "value",      "elevation_safety",                 "torque_in_l"   , true }
146
147
	{ "dt_el_l",                        "be4",        "elevation_safety",                 "safety_in_top",    true }
	{ "dt_el_l",                        "be2",        "elevation_safety",                 "safety_in_bottom", true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
148
	{ "elevation_servo_state",          "enable",     "elevation_safety",                 "enable"       , true }
149
150
151
152
	{ "elevation_safety",               "speed_out_r", "dt_el_r",                         "speed"        , true } 
	{ "elevation_safety",               "speed_out_l", "dt_el_l",                         "speed"        , true }
	{ "elevation_safety",               "torque_out_r","dt_el_r",                         "torque"       , true }
	{ "elevation_safety",               "torque_out_l","dt_el_l",                         "torque"       , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
153
154
	{ "elevation_servo_state",          "enable",     "dt_el_r",                          "enable"       , true }
	{ "elevation_servo_state",          "enable",     "dt_el_l",                          "enable"       , true }
155
156
157
158
	{ "false",                          "value",      "dt_el_r",                          "ba1"          , true }
	{ "false",			    "value",      "dt_el_r",                          "ba2"          , true }
	{ "false",                          "value",      "dt_el_l",                          "ba1"          , true }
	{ "false",			    "value",      "dt_el_l",                          "ba2"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
159
160
	
	{ "elevation_servo_state",          "reset",      "elevation_torsion_spg",            "reset"        , false }
161
162
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_spg",            "reset_x"      , true }
	{ "elevation_torsion_spg",          "x",          "elevation_torsion_error",          "positive"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
163
164
165
166
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_error",          "negative"     , true }
	{ "elevation_torsion_spg",          "setpoint",   "elevation_torsion_setpoint_error", "positive"     , true }
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_setpoint_error", "negative"     , true }
	{ "elevation_torsion_error",        "difference", "elevation_torsion_pid",            "in"           , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
167
	{ "elevation_servo_state",          "enable",     "elevation_torsion_pid",            "enable"       , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
168
169
170
171
172
	{ "elevation_torsion_pid",          "out",        "elevation_torsion_speed_limit",    "in"           , true }
	{ "elevation_torsion_speed_limit",  "out",        "elevation_output_matrix",          "in1"          , true }
}

traces {
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
	{ "Azimuth_Spg0",                     "rad",       "azimuth_spg",                      "x"          }
	{ "Azimuth_Spg1",                     "rad/s",     "azimuth_spg",                      "v"          }
	{ "Azimuth_Spg2",                     "rad/s/s",   "azimuth_spg",                      "a"          }
	{ "Azimuth_Spg3",                     "rad/s/s/s", "azimuth_spg",                      "j"          }
	{ "Azimuth_Setpoint",                 "rad",       "azimuth_spg",                      "setpoint"   }
	{ "Azimuth_Error",                    "rad",       "azimuth_error",                    "difference" }
	{ "Azimuth_Setpoint_Error",           "rad",       "azimuth_setpoint_error",           "difference" }
	{ "Azimuth_PID",                      "rad/s",     "azimuth_pid",                      "out"        }
	{ "Azimuth_I",                        "rad/s",     "azimuth_pid",                      "outi"       }
	{ "Azimuth_PID_filtered",             "rad/s",     "azimuth_pid_filter",               "out"        }
	{ "Azimuth_Position",                 "rad",       "azimuth_position_offset_sum",      "out"        }
	{ "Azimuth_Speed",                    "rad/s",     "dt_az",                            "speed"      }
	{ "Azimuth_Torque",                   "Nm",        "dt_az",                            "torque"     }
	{ "Azimuth_Safe",                     "Boolean",   "azimuth_safety",                   "safe_out"   }
	{ "Azimuth_Enabled",                  "Boolean",   "dt_az",                            "enabled"    }
	{ "Azimuth_Drive_Safety",             "Boolean",   "dt_az",                            "be1"        }
	{ "Azimuth_Drive_Safety_p270",        "Boolean",   "dt_az",                            "be4"        }
	{ "Azimuth_Drive_Safety_m270",        "Boolean",   "dt_az",                            "be2"        }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
191
		
192
	{ "Focusbox_Position",                "Volt",      "dt_az",                            "ae1"	    }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
193

194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
	{ "Elevation_Position",               "rad",       "elevation_input_matrix",           "out0"       }
	{ "Elevation_Torsion",                "rad",       "elevation_input_matrix",           "out1"       }
	{ "Elevation_Setpoint",               "rad",       "elevation_spg",                    "setpoint"   }
	{ "Elevation_Spg0",                   "rad",       "elevation_spg",                    "x"          }
	{ "Elevation_Spg1",                   "rad/s",     "elevation_spg",                    "v"          }
	{ "Elevation_Spg2",                   "rad/s",     "elevation_spg",                    "a"          }
	{ "Elevation_Spg3",                   "rad/s",     "elevation_spg",                    "j"          }
	{ "Elevation_Error",                  "rad",       "elevation_error",                  "difference" }
	{ "Elevation_Setpoint_Error",         "rad",       "elevation_setpoint_error",         "difference" }
	{ "Elevation_PID",                    "rad/s",     "elevation_pid",                    "out"        }
	{ "Elevation_Torsion_Error",          "rad",       "elevation_torsion_error",          "difference" }
	{ "Elevation_Torsion_Setpoint_Error", "rad",       "elevation_torsion_setpoint_error", "difference" }
	{ "Elevation_Torsion_PID",            "rad/s",     "elevation_torsion_pid",            "out"        }
	{ "Elevation_Position_Right",         "rad",       "elevation_position_offset_r_sum",  "out"        }
	{ "Elevation_Position_Left",          "rad",       "elevation_position_offset_l_sum",  "out"        }
	{ "Elevation_Speed_Right",            "rad/s",     "dt_el_r",                          "speed"      }
	{ "Elevation_Speed_Left",             "rad/s",     "dt_el_l",                          "speed"      }
	{ "Elevation_Torque_Right",           "Nm",        "dt_el_r",                          "torque"     }
	{ "Elevation_Torque_Left",            "Nm",        "dt_el_l",                          "torque"     }
	{ "Elevation_Torsion_Torque",         "Nm",        "elevation_torsion_torque_lp",      "out"        }
	{ "Elevation_Safe",                   "Boolean",   "elevation_safety",                 "safe_out"   }
	{ "Elevation_Enabled",                "Boolean",   "dt_el_l",                          "enabled"    }
	{ "Elevation_Drive_Safety_Right",     "Boolean",   "dt_el_r",                          "be1"        }
	{ "Elevation_Drive_Safety_Left",      "Boolean",   "dt_el_l",                          "be1"        }
	{ "Elevation_Top_Safe",               "Boolean",   "dt_el_l",                          "be4"        }
	{ "Elevation_Bottom_Safe",            "Boolean",   "dt_el_l",                          "be2"        }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
220
221
}

222
223
224
set azimuth_gear	15006.75
set elevation_gear	44803.125

Jeroen Vreeken's avatar
Jeroen Vreeken committed
225
params {
226
227
	{ "azimuth_spg",           "setpoint",            (float) 0.0		 }
	{ "azimuth_spg",           "t",                   (float) 0.004          }
228
	# maximum speed and position clients input is checked against
229
230
231
	{ "azimuth_spg",           "max_x",               (float) deg2rad(270.0)   }
	{ "azimuth_spg",           "min_x",               (float) deg2rad(-270.0)  }
	{ "azimuth_spg",           "max_v",               (float) rpm2rads(2100.0)/$(azimuth_gear) }
232
	# acceleration and jerk we use to generate a profile
233
234
	{ "azimuth_spg",           "max_a",               (float) 0.0002    	 }
	{ "azimuth_spg",           "max_j",               (float) 0.00001        }
235
	# at which precision do we consider the values to be 'equal'
236
237
238
	{ "azimuth_spg",           "precision_x",         (float) 0.000001       }
	{ "azimuth_spg",           "precision_a",         (float) 0.000001       }
	{ "azimuth_spg",           "precision_v",         (float) 0.000001       }
239
	# maximum values within we allow normal operation
240
241
242
	{ "azimuth_servo_state",   "max_x",               (float) deg2rad(270.0)   }
	{ "azimuth_servo_state",   "min_x",               (float) deg2rad(-270.0)  }
	{ "azimuth_servo_state",   "max_v",               (float) rpm2rads(2100.0)/$(azimuth_gear) }
243
	{ "azimuth_servo_state",   "max_a",               (float) 0.0002         }
244
	# controller factors
245
246
247
248
	{ "azimuth_pid",           "kp",                  (float) 0.20           }
	{ "azimuth_pid",           "ki",                  (float) 0.00           }
	{ "azimuth_pid",           "kd",                  (float) 0.0            }
	{ "azimuth_pid",           "t",                   (float) 0.004          }
249
	# the amount of 'wind-up' we allow in the integrator
250
251
	{ "azimuth_pid",           "maxw",                (float) rpm2rads(0.005)  }
	{ "azimuth_pid",           "minw",                (float) rpm2rads(-0.005) }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
252

253
	# second order filter to make sure we do not trigger the eigenfrequency of the DT
Jeroen Vreeken's avatar
Jeroen Vreeken committed
254
255
256
	{ "azimuth_pid_filter",    "transfer",            (int) 2,
							  (double) 6.343831259e+05,
						          (float) { -0.9964520027, 1.9964456974 },
257
							  (float) { 1.0, 2.0 }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
258
259
										}

260
261
262
263
	# Due to high vibrations observed at high speed it was decided to limit
	# the pid controller. At low speed the value is untouched, but the 
	# output is limited when speed increases 
	# limit = offset + gain * speed
Jeroen Vreeken's avatar
Jeroen Vreeken committed
264
	{ "azimuth_pid_limit",     "offset",              (float) 0.0006981317007977318308 }
265
	{ "azimuth_pid_limit",     "gain",                (float)-0.3               }
266
	# speed limit on spg + pid just before we send it to the drive
267
268
	{ "azimuth_speed_limit",   "min",                 (float) rpm2rads(-3000.0)/$(azimuth_gear) }
	{ "azimuth_speed_limit",   "max",                 (float) rpm2rads(3000.0)/$(azimuth_gear)  }
269
	# gear ratio between DT and servodrive
270
	{ "azimuth_speed_servo",   "gain",                (float)-$(azimuth_gear)          }
271
	# torque we allow the servodrive to actuate on the DT
272
	{ "azimuth_torque",        "value",               (float) 10.0              }
273
	# inverse gear ratio between DT and servodrive
274
	{ "azimuth_position_gain", "gain",                (float)-1/$(azimuth_gear) }
275
	# callibration value for position
276
	{ "azimuth_position_offset","value",              (float) 0.0               }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
277

278
279
	# positions were we go into safe behavior
	# these must be outside the normal operating range
280
281
	{ "azimuth_safety",        "position_min",        (float) deg2rad(-290.0) }
	{ "azimuth_safety",        "position_max",        (float) deg2rad(290.0)  }
282
283
	# 'safe zone' is between the operating range and the absolute safety
	# value above
284
285
	{ "azimuth_safety",        "safe_zone_min",       (float) deg2rad(-280.0) }
	{ "azimuth_safety",        "safe_zone_max",       (float) deg2rad(280.0)  }
286
287
	{ "azimuth_safety",        "safe_zone_min_speed", (float) rpm2rads(-0.001) }
	{ "azimuth_safety",        "safe_zone_max_speed", (float) rpm2rads(0.001)  }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
288
	{ "azimuth_safety",        "emergency_torque",    (float) 3.0           }
289
	# we do not start in recovery mode
Jeroen Vreeken's avatar
Jeroen Vreeken committed
290
	{ "azimuth_safety",        "recover",             (int)   0  		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
291
	
292
293
        { "elevation_input_matrix", "constants",          (float) { 0.5/$(elevation_gear), -0.5/$(elevation_gear) },
                                        	                  (float) { 1.0/$(elevation_gear), 1.0/$(elevation_gear) } }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
294

295
296
	{ "elevation_output_matrix", "constants",         (float) { $(elevation_gear),  $(elevation_gear)/2.0 }, 
							  (float) { -$(elevation_gear), $(elevation_gear)/2.0 } }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
297
298
299

	{ "elevation_spg",         "setpoint",            (float) 0.0           }
	{ "elevation_spg",         "t",                   (float) 0.004         }
300
	{ "elevation_spg",         "max_x",               (float) deg2rad(90.0)   }
301
	{ "elevation_spg",         "min_x",               (float) deg2rad(-0.05)  }
302
	{ "elevation_spg",         "max_v",               (float) rpm2rads(2100.0)/$(elevation_gear) }
303
304
305
306
307
	{ "elevation_spg",         "max_a",               (float) 0.0003   	}
	{ "elevation_spg",         "max_j",               (float) 0.000016	}
	{ "elevation_spg",         "precision_x",         (float) 0.000001      }
	{ "elevation_spg",         "precision_a",         (float) 0.000001      }
	{ "elevation_spg",         "precision_v",         (float) 0.000001      }
308
	{ "elevation_servo_state", "max_x",               (float) deg2rad(90.0)   }
309
	{ "elevation_servo_state", "min_x",               (float) deg2rad(-0.05)  }
310
	{ "elevation_servo_state", "max_v",               (float) rpm2rads(2100.0)/$(elevation_gear) }
311
	{ "elevation_servo_state", "max_a",               (float) 0.0003   	}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
312
313
	{ "elevation_torsion_spg", "setpoint",            (float) 0.0           }
	{ "elevation_torsion_spg", "t",                   (float) 0.004         }
314
315
	{ "elevation_torsion_spg", "max_x",               (float) 0.01          }
	{ "elevation_torsion_spg", "min_x",               (float)-0.01          }
316
	{ "elevation_torsion_spg", "max_v",               (float) rpm2rads(0.001) }
317
318
319
320
321
	{ "elevation_torsion_spg", "max_a",               (float) 0.00004 	}
	{ "elevation_torsion_spg", "max_j",               (float) 0.00001 	}
	{ "elevation_torsion_spg", "precision_x",         (float) 0.000001      }
	{ "elevation_torsion_spg", "precision_a",         (float) 0.000001      }
	{ "elevation_torsion_spg", "precision_v",         (float) 0.000001      }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
322
323
324
325
	{ "elevation_pid",         "kp",                  (float) 0.80     	}
	{ "elevation_pid",         "ki",                  (float) 0.001  	}
	{ "elevation_pid",         "kd",                  (float) 0.001   	}
	{ "elevation_pid",         "t",                   (float) 0.004         }
326
327
328
329
	{ "elevation_pid",         "maxw",                (float) rpm2rads(0.002)  }
	{ "elevation_pid",         "minw",                (float) rpm2rads(-0.002) }
	{ "elevation_speed_limit", "min",                 (float) rpm2rads(-0.08)  }
	{ "elevation_speed_limit", "max",                 (float) rpm2rads(0.08)   }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
330
331
332
333
334
335
336
	{ "elevation_jerk_limit",  "min",                 (float)-0.003         }
	{ "elevation_jerk_limit",  "max",                 (float) 0.003         }
	{ "elevation_jerk_limit",  "t",                   (float) 0.004         }
	{ "elevation_torsion_pid", "t",                   (float) 0.004         }
	{ "elevation_torsion_pid", "kp",                  (float) 0.2  		}
	{ "elevation_torsion_pid", "ki",                  (float) 0.0  		}
	{ "elevation_torsion_pid", "kd",                  (float) 0.0 		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
337
338
	{ "elevation_torsion_pid", "maxw",                (float) 0.0001 }
	{ "elevation_torsion_pid", "minw",                (float)-0.0001 }
339
340
	{ "elevation_torsion_speed_limit", "min",         (float) rpm2rads(-0.001) }
	{ "elevation_torsion_speed_limit", "max",         (float) rpm2rads(0.001)  }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
341
342
343
344
345
346
347


	{ "elevation_safety",      "safe_zone_min_speed", (float)-30  		}
	{ "elevation_safety",      "safe_zone_max_speed", (float) 30  		}
	{ "elevation_safety",      "torsion_max",         (float) 0.0002 	}

	{ "elevation_safety",      "recover",             (int)   0  		}
348
	{ "elevation_safety",      "torque_max",          (float) 20.0		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
	{ "elevation_safety",      "emergency_torque",    (float) 3.0 		}

	{ "elevation_torque_r",    "value",               (float) 10.0          }
	{ "elevation_torque_l",    "value",               (float) 10.0          }
	{ "elevation_torsion_torque_lp", "t",             (float) 0.004         }
	{ "elevation_torsion_torque_lp", "tau",           (float) 10.0          }
	{ "elevation_position_offset_r","value",          (float) 0.0           }
	{ "elevation_position_offset_l","value",          (float) 0.0           }

	{ "elevation_safety",      "position_min",        (float) -78.19620464325844733  }
	{ "elevation_safety",      "position_max",        (float)  70767.56520214889483  }
	{ "elevation_safety",      "safe_zone_min",       (float) -70.37658417893260259  }
	{ "elevation_safety",      "safe_zone_max",       (float)  70689.36899750563638  }
	{ "elevation_safety",      "torsion_recover_max", (float) 0.01745329251994329577 }
}
364
365
366
367

# Load file with calibration parameters.
# All parameters above should not be subject to calibration.
include "dt_ctrl.param"