dt_ctrl.ctrl 27.3 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
#	dt_ctrl.ctrl
#
#	Controller network for Dwingeloo Telescope.
#
#	This file contains the fixed part of the network and its parameters.
#	Other .ctrl files are used for those parts which are conditional,
#	such as the use of simulation networks or real servo drives.
#

# Frequency is limited by the stoeber drives.
Jeroen Vreeken's avatar
Jeroen Vreeken committed
11
12
frequency 250

13
14
15
16
trigger {
	{ "prestart", 0.000150 }
}

17
18
19
20
# dt_ctrl_el.ctrl	Elevation with real servo drives
# dt_ctrl_el_sim.ctrl	Elevation with simulated network
# dt_ctrl_az.ctrl	Azimuth with real servo drives
# dt_ctrl_az_sim.ctrl	Azimuth with simulated network
Jeroen Vreeken's avatar
Jeroen Vreeken committed
21
# dt_ctrl_ec_sim.ctrl   Ethercat simulation block
22
#
23
24
25
# Uncomment either the real network, or the sim network.
# But never both!

26
27
#import "dt_ctrl_el.ctrl"
import "dt_ctrl_el_sim.ctrl"
28

29
30
#import "dt_ctrl_az.ctrl"
import "dt_ctrl_az_sim.ctrl"
31

32
import "dt_ctrl_ec_sim.ctrl"
33

Jeroen Vreeken's avatar
Jeroen Vreeken committed
34
blocks {
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
	{ "setpoint_generator_3d", "azimuth_spg", 	"Azimuth_Setpoint", "rad" }
	{ "servo_state",           "azimuth_servo_state"           }
	{ "and2",                  "azimuth_safe_and"              }
	{ "subtract",	           "azimuth_setpoint_error"	   }
	{ "subtract",              "azimuth_error"		   }
	{ "pid_aw",	           "azimuth_pid"		   }
	{ "filter_iir",	           "azimuth_pid_filter"		   }
	{ "limit_var",	           "azimuth_pid_limit"		   }
	{ "add",  	           "azimuth_speed_ff" 		   }
	{ "limit",	           "azimuth_speed_limit"	   }
	{ "dt_az_safety",          "azimuth_safety"		   }
	{ "gain", 	           "azimuth_speed_servo"	   }
	{ "value",	           "azimuth_torque"		   }
	{ "value",	           "azimuth_position_offset"  	   }
	{ "add",  	           "azimuth_position_offset_sum"   }
	{ "gain", 	           "azimuth_position_gain"	   }
	{ "rangecheck",		   "azimuth_speed_warning"         }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
52
	
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
	{ "matrix_2x2",	           "elevation_input_matrix"	      }
	{ "setpoint_generator_3d", "elevation_spg", 		"Elevation_Setpoint", "rad" }
	{ "servo_state",           "elevation_servo_state"            }
 	{ "and2",                  "elevation_safe_and"               }
	{ "setpoint_generator_1d", "elevation_torsion_spg",	"Elevation_Torsion_Setpoint", "rad" }
	{ "subtract",	           "elevation_setpoint_error" 	      }
	{ "subtract",  	           "elevation_error"  		      }
	{ "subtract",	           "elevation_torsion_error"  	      }
	{ "subtract",	           "elevation_torsion_setpoint_error" }
	{ "subtract",	           "elevation_torsion_torque" 	      }
	{ "filter_lp",	           "elevation_torsion_torque_lp"      }
	{ "pid_aw",	           "elevation_pid"	      	      }
	{ "pid_aw",  	           "elevation_torsion_pid"	      }
	{ "add",  	           "elevation_speed_ff"		      }
	{ "switch",                "elevation_position_switch"        }
	{ "limit",	           "elevation_torsion_speed_limit"    }
	{ "limit",	           "elevation_speed_limit"	      }
	{ "limit_2nd",	           "elevation_jerk_limit"	      }
	{ "dt_el_safety",          "elevation_safety" 		      }
	{ "matrix_2x2",	           "elevation_output_matrix"  	      }
	{ "value",	           "elevation_torque_r"		      }
	{ "value",	           "elevation_torque_l"		      }
	{ "value",	           "elevation_position_offset_r"      }
	{ "value",	           "elevation_position_offset_l"      }
	{ "add",  	           "elevation_position_offset_r_sum"  }
	{ "add",  	           "elevation_position_offset_l_sum"  }
79

Jeroen Vreeken's avatar
Jeroen Vreeken committed
80
81
82
	{ "command_bool",          "focusbox_plus" }
	{ "command_bool",          "focusbox_min"  }

83
	{ "value_bool", 	   "false"	}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
84
85
}

86
alias {
Jeroen Vreeken's avatar
Jeroen Vreeken committed
87
88
89
90
	{ "Azimuth_Position",          "azimuth_position_offset_sum", "out"  }
	{ "Azimuth_Drive_Safety_p270", "dt_az", "be4" }
	{ "Azimuth_Drive_Safety_m270", "dt_az", "be2" }
	{ "Elevation_Position",        "elevation_input_matrix",      "out0" }
91
92
}

Jeroen Vreeken's avatar
Jeroen Vreeken committed
93
94
95
96
links {
	{ "dt_az",                          "position",   "azimuth_position_gain",            "in"           , true }
	{ "azimuth_position_gain",          "out",        "azimuth_position_offset_sum",      "in0"          , true }
	{ "azimuth_position_offset",        "value",      "azimuth_position_offset_sum",      "in1"          , true }
97
	{ $<Azimuth_Position>,                            "azimuth_error",                    "negative"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
98
	{ "azimuth_servo_state",            "reset",      "azimuth_spg",                      "reset"        , false }
99
	{ $<Azimuth_Position>,                            "azimuth_spg",                      "reset_x"      , true }
100
101
102
	{ "azimuth_spg",                    "x",          "azimuth_servo_state",              "spg_x"        , true }
	{ "azimuth_spg",                    "v",          "azimuth_servo_state",              "spg_v"        , true }
	{ "azimuth_spg",                    "a",          "azimuth_servo_state",              "spg_a"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
103
	{ "azimuth_safety",                 "safe_out",   "azimuth_safe_and",                 "a"            , false }
104
	{ "ethercat",                       "operational","azimuth_safe_and",                 "b"            , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
105
	{ "azimuth_safe_and",               "q",          "azimuth_servo_state",              "safe"         , true }
106
	{ "azimuth_safety",                 "recover",    "azimuth_servo_state",              "override"     , false }
107
	{ "azimuth_servo_state",            "out_x",      "azimuth_error",                    "positive"     , true }
108
	{ $<Azimuth_Position>,                            "azimuth_setpoint_error",           "negative"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
109
	{ "azimuth_spg",                    "setpoint",   "azimuth_setpoint_error",           "positive"     , true }
110
	{ "azimuth_servo_state",            "out_v",      "azimuth_speed_ff",                 "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
111
112
113
	{ "azimuth_error",                  "difference", "azimuth_pid",                      "in"           , true }
	{ "azimuth_servo_state",            "enable",     "azimuth_pid",                      "enable"       , true }
	{ "azimuth_pid",                    "out",        "azimuth_pid_limit",                "in"           , true }
114
	{ "azimuth_servo_state",            "out_v",      "azimuth_pid_limit",                "limit"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
115
116
117
118
	{ "azimuth_pid_limit",              "out",        "azimuth_pid_filter",               "in"           , true }
	{ "azimuth_pid_filter",             "out",        "azimuth_speed_ff",                 "in1"          , true }
	{ "azimuth_speed_ff",               "out",        "azimuth_speed_limit",              "in"           , true }
	{ "azimuth_speed_limit",            "out",        "azimuth_safety",                   "speed_in"     , true }
119
	{ $<Azimuth_Position>,                            "azimuth_safety",                   "position_in"  , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
120
	{ "azimuth_torque",                 "value",      "azimuth_safety",                   "torque_in"    , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
121
122
	{ $<Azimuth_Drive_Safety_p270>,                   "azimuth_safety",                   "safety_in_positive", true }
	{ $<Azimuth_Drive_Safety_m270>,                   "azimuth_safety",                   "safety_in_negative", true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
123
124
125
126
127
	{ "azimuth_servo_state",            "enable",     "azimuth_safety",                   "enable"       , true }
        { "azimuth_safety",                 "speed_out",  "azimuth_speed_servo",              "in"           , true }
	{ "azimuth_speed_servo",            "out",        "dt_az",                            "speed"        , true }
	{ "azimuth_safety",                 "torque_out", "dt_az",                            "torque"       , true }
	{ "azimuth_servo_state",            "enable",     "dt_az",                            "enable"       , true }
128
129
	{ "dt_az",                          "speed",      "azimuth_speed_warning",            "in"           , true }
	{ "azimuth_speed_warning",          "invalid",    "dt_az",                            "ba1"          , true }
130
	{ "false",			    "value",      "dt_az",                            "ba2"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
131
132

	{ "elevation_servo_state",          "reset",      "elevation_spg",                    "reset"        , false }
133
	{ $<Elevation_Position>,                          "elevation_spg",                    "reset_x"      , true }
134
135
136
	{ "elevation_spg",                  "x",          "elevation_servo_state",            "spg_x"        , true }
	{ "elevation_spg",                  "v",          "elevation_servo_state",            "spg_v"        , true }
	{ "elevation_spg",                  "a",          "elevation_servo_state",            "spg_a"        , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
137
	{ "elevation_safety",               "safe_out",   "elevation_safe_and",               "a"            , false }
138
	{ "ethercat",                       "operational","elevation_safe_and",               "b"            , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
139
	{ "elevation_safe_and",             "q",          "elevation_servo_state",            "safe"         , true }
140
	{ "elevation_safety",               "recover",    "elevation_servo_state",            "override"     , false }
141
142
	{ "elevation_servo_state",          "out_x",      "elevation_error",                  "positive"     , true }
	{ "elevation_servo_state",          "out_v",      "elevation_speed_ff",               "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
143
144
	{ "dt_el_r",                        "position",   "elevation_position_offset_r_sum",  "in0"          , true }
	{ "dt_el_l",                        "position",   "elevation_position_offset_l_sum",  "in0"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
145
146
147
148
	{ "elevation_position_offset_r",    "value",      "elevation_position_offset_r_sum",  "in1"          , true }
	{ "elevation_position_offset_l",    "value",      "elevation_position_offset_l_sum",  "in1"          , true }
	{ "elevation_position_offset_r_sum","out",        "elevation_input_matrix",           "in0"          , true }
	{ "elevation_position_offset_l_sum","out",        "elevation_input_matrix",           "in1"          , true }
149
	{ $<Elevation_Position>,                          "elevation_error",                  "negative"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
150
	{ "elevation_spg",                  "setpoint",   "elevation_setpoint_error",         "positive"     , true }
151
	{ $<Elevation_Position>,                          "elevation_setpoint_error",         "negative"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
152
153
154
155
156
157
158
159
160
	{ "elevation_error",                "difference", "elevation_pid",                    "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_pid",                    "enable"       , true }
	{ "elevation_pid",                  "out",        "elevation_speed_ff",               "in1"          , true }
	{ "elevation_speed_ff",             "out",        "elevation_position_switch",        "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_position_switch",        "on"           , true }
	{ "elevation_position_switch",      "out",        "elevation_speed_limit",            "in"           , true }
	{ "elevation_servo_state",          "enable",     "elevation_jerk_limit",             "enable"       , true }
	{ "elevation_speed_limit",          "out",        "elevation_jerk_limit",             "in"           , true }
	{ "elevation_jerk_limit",           "out",        "elevation_output_matrix",          "in0"          , true }
161
162
163
	{ "dt_el_r",                        "torque",     "elevation_torsion_torque",         "positive"     , true }
	{ "dt_el_l",                        "torque",     "elevation_torsion_torque",         "negative"     , true }
	{ "elevation_torsion_torque",       "difference", "elevation_torsion_torque_lp",      "in"           , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
164
165
	{ "elevation_position_offset_r_sum","out",        "elevation_safety",                 "position_in_r" , true }
	{ "elevation_position_offset_l_sum","out",        "elevation_safety",                 "position_in_l" , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
166
	{ "elevation_input_matrix",         "out1",       "elevation_safety",                 "torsion_in"   , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
167
168
	{ "elevation_output_matrix",        "out0",       "elevation_safety",                 "speed_in_r"    , true }
	{ "elevation_output_matrix",        "out1",       "elevation_safety",                 "speed_in_l"    , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
169
	{ "elevation_torsion_torque_lp",    "out",        "elevation_safety",                 "torque_in"    , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
170
171
	{ "elevation_torque_r",             "value",      "elevation_safety",                 "torque_in_r"   , true }
	{ "elevation_torque_l",             "value",      "elevation_safety",                 "torque_in_l"   , true }
172
173
	{ "dt_el_l",                        "be4",        "elevation_safety",                 "safety_in_top",    true }
	{ "dt_el_l",                        "be2",        "elevation_safety",                 "safety_in_bottom", true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
174
	{ "elevation_servo_state",          "enable",     "elevation_safety",                 "enable"       , true }
175
176
177
178
	{ "elevation_safety",               "speed_out_r", "dt_el_r",                         "speed"        , true } 
	{ "elevation_safety",               "speed_out_l", "dt_el_l",                         "speed"        , true }
	{ "elevation_safety",               "torque_out_r","dt_el_r",                         "torque"       , true }
	{ "elevation_safety",               "torque_out_l","dt_el_l",                         "torque"       , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
179
180
	{ "elevation_servo_state",          "enable",     "dt_el_r",                          "enable"       , true }
	{ "elevation_servo_state",          "enable",     "dt_el_l",                          "enable"       , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
181
182
	{ "focusbox_plus",                  "value",      "dt_el_r",                          "ba1"          , true }
	{ "focusbox_min",		    "value",      "dt_el_r",                          "ba2"          , true }
183
184
	{ "false",                          "value",      "dt_el_l",                          "ba1"          , true }
	{ "false",			    "value",      "dt_el_l",                          "ba2"          , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
185
186
	
	{ "elevation_servo_state",          "reset",      "elevation_torsion_spg",            "reset"        , false }
187
188
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_spg",            "reset_x"      , true }
	{ "elevation_torsion_spg",          "x",          "elevation_torsion_error",          "positive"     , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
189
190
191
192
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_error",          "negative"     , true }
	{ "elevation_torsion_spg",          "setpoint",   "elevation_torsion_setpoint_error", "positive"     , true }
	{ "elevation_input_matrix",         "out1",       "elevation_torsion_setpoint_error", "negative"     , true }
	{ "elevation_torsion_error",        "difference", "elevation_torsion_pid",            "in"           , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
193
	{ "elevation_servo_state",          "enable",     "elevation_torsion_pid",            "enable"       , true }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
194
195
196
197
198
	{ "elevation_torsion_pid",          "out",        "elevation_torsion_speed_limit",    "in"           , true }
	{ "elevation_torsion_speed_limit",  "out",        "elevation_output_matrix",          "in1"          , true }
}

traces {
199
200
201
202
203
204
205
206
207
208
	{ "Azimuth_Spg0",                     "rad",       "azimuth_spg",                      "x"          }
	{ "Azimuth_Spg1",                     "rad/s",     "azimuth_spg",                      "v"          }
	{ "Azimuth_Spg2",                     "rad/s/s",   "azimuth_spg",                      "a"          }
	{ "Azimuth_Spg3",                     "rad/s/s/s", "azimuth_spg",                      "j"          }
	{ "Azimuth_Setpoint",                 "rad",       "azimuth_spg",                      "setpoint"   }
	{ "Azimuth_Error",                    "rad",       "azimuth_error",                    "difference" }
	{ "Azimuth_Setpoint_Error",           "rad",       "azimuth_setpoint_error",           "difference" }
	{ "Azimuth_PID",                      "rad/s",     "azimuth_pid",                      "out"        }
	{ "Azimuth_I",                        "rad/s",     "azimuth_pid",                      "outi"       }
	{ "Azimuth_PID_filtered",             "rad/s",     "azimuth_pid_filter",               "out"        }
209
	{ "Azimuth_Position",                 "rad",       $<Azimuth_Position>                              }
210
211
212
213
214
	{ "Azimuth_Speed",                    "rad/s",     "dt_az",                            "speed"      }
	{ "Azimuth_Torque",                   "Nm",        "dt_az",                            "torque"     }
	{ "Azimuth_Safe",                     "Boolean",   "azimuth_safety",                   "safe_out"   }
	{ "Azimuth_Enabled",                  "Boolean",   "dt_az",                            "enabled"    }
	{ "Azimuth_Drive_Safety",             "Boolean",   "dt_az",                            "be1"        }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
215
216
	{ "Azimuth_Drive_Safety_p270",        "Boolean",   $<Azimuth_Drive_Safety_p270>                     }
	{ "Azimuth_Drive_Safety_m270",        "Boolean",   $<Azimuth_Drive_Safety_m270>                     }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
217
		
218
	{ "Focusbox_Position",                "Volt",      "dt_az",                            "ae1"	    }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
219

220
	{ "Elevation_Position",               "rad",       $<Elevation_Position>                            }
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
	{ "Elevation_Torsion",                "rad",       "elevation_input_matrix",           "out1"       }
	{ "Elevation_Setpoint",               "rad",       "elevation_spg",                    "setpoint"   }
	{ "Elevation_Spg0",                   "rad",       "elevation_spg",                    "x"          }
	{ "Elevation_Spg1",                   "rad/s",     "elevation_spg",                    "v"          }
	{ "Elevation_Spg2",                   "rad/s",     "elevation_spg",                    "a"          }
	{ "Elevation_Spg3",                   "rad/s",     "elevation_spg",                    "j"          }
	{ "Elevation_Error",                  "rad",       "elevation_error",                  "difference" }
	{ "Elevation_Setpoint_Error",         "rad",       "elevation_setpoint_error",         "difference" }
	{ "Elevation_PID",                    "rad/s",     "elevation_pid",                    "out"        }
	{ "Elevation_Torsion_Error",          "rad",       "elevation_torsion_error",          "difference" }
	{ "Elevation_Torsion_Setpoint_Error", "rad",       "elevation_torsion_setpoint_error", "difference" }
	{ "Elevation_Torsion_PID",            "rad/s",     "elevation_torsion_pid",            "out"        }
	{ "Elevation_Position_Right",         "rad",       "elevation_position_offset_r_sum",  "out"        }
	{ "Elevation_Position_Left",          "rad",       "elevation_position_offset_l_sum",  "out"        }
	{ "Elevation_Speed_Right",            "rad/s",     "dt_el_r",                          "speed"      }
	{ "Elevation_Speed_Left",             "rad/s",     "dt_el_l",                          "speed"      }
	{ "Elevation_Torque_Right",           "Nm",        "dt_el_r",                          "torque"     }
	{ "Elevation_Torque_Left",            "Nm",        "dt_el_l",                          "torque"     }
	{ "Elevation_Torsion_Torque",         "Nm",        "elevation_torsion_torque_lp",      "out"        }
	{ "Elevation_Safe",                   "Boolean",   "elevation_safety",                 "safe_out"   }
	{ "Elevation_Enabled",                "Boolean",   "dt_el_l",                          "enabled"    }
	{ "Elevation_Drive_Safety_Right",     "Boolean",   "dt_el_r",                          "be1"        }
	{ "Elevation_Drive_Safety_Left",      "Boolean",   "dt_el_l",                          "be1"        }
	{ "Elevation_Top_Safe",               "Boolean",   "dt_el_l",                          "be4"        }
	{ "Elevation_Bottom_Safe",            "Boolean",   "dt_el_l",                          "be2"        }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
246
247
}

248
249
250
set azimuth_gear	15006.75
set elevation_gear	44803.125

Jeroen Vreeken's avatar
Jeroen Vreeken committed
251
params {
252
	{ "azimuth_spg",           "setpoint",            (float) 0.0		 }
253
	# maximum speed and position clients input is checked against
254
255
	{ "azimuth_spg",           "max_x",               (float) deg2rad(270.0)   }
	{ "azimuth_spg",           "min_x",               (float) deg2rad(-270.0)  }
256
	{ "azimuth_spg",           "max_v",               (float) rpm2rads(3000.0)/$(azimuth_gear) }
257
	# acceleration and jerk we use to generate a profile
258
259
	{ "azimuth_spg",           "max_a",               (float) 0.0002    	 }
	{ "azimuth_spg",           "max_j",               (float) 0.00001        }
260
	# at which precision do we consider the values to be 'equal'
261
262
263
	{ "azimuth_spg",           "precision_x",         (float) 0.000001       }
	{ "azimuth_spg",           "precision_a",         (float) 0.000001       }
	{ "azimuth_spg",           "precision_v",         (float) 0.000001       }
264
	# maximum values within we allow normal operation
265
266
	{ "azimuth_servo_state",   "max_x",               (float) deg2rad(270.0)   }
	{ "azimuth_servo_state",   "min_x",               (float) deg2rad(-270.0)  }
267
	{ "azimuth_servo_state",   "max_v",               (float) rpm2rads(3000.0)/$(azimuth_gear) }
268
	{ "azimuth_servo_state",   "max_a",               (float) 0.0002         }
269
	# controller factors
270
271
272
	{ "azimuth_pid",           "kp",                  (float) 0.20           }
	{ "azimuth_pid",           "ki",                  (float) 0.00           }
	{ "azimuth_pid",           "kd",                  (float) 0.0            }
273
	# the amount of 'wind-up' we allow in the integrator
274
275
	{ "azimuth_pid",           "maxw",                (float) rpm2rads(0.005)  }
	{ "azimuth_pid",           "minw",                (float) rpm2rads(-0.005) }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
276

277
	# second order filter to make sure we do not trigger the eigenfrequency of the DT
Jeroen Vreeken's avatar
Jeroen Vreeken committed
278
279
280
	{ "azimuth_pid_filter",    "transfer",            (int) 2,
							  (double) 6.343831259e+05,
						          (float) { -0.9964520027, 1.9964456974 },
281
							  (float) { 1.0, 2.0 }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
282
283
										}

284
285
286
	{ "azimuth_speed_warning", "max",                 (double) rpm2rads(200.0)  }
	{ "azimuth_speed_warning", "min",                 (double) rpm2rads(-200.0) }

287
288
289
290
	# Due to high vibrations observed at high speed it was decided to limit
	# the pid controller. At low speed the value is untouched, but the 
	# output is limited when speed increases 
	# limit = offset + gain * speed
291
	{ "azimuth_pid_limit",     "offset",              (float) rpm2rads(100.0)/$(azimuth_gear) }
292
	{ "azimuth_pid_limit",     "gain",                (float)-0.3               }
293
	# speed limit on spg + pid just before we send it to the drive
294
295
	{ "azimuth_speed_limit",   "min",                 (float) rpm2rads(-3000.0)/$(azimuth_gear) }
	{ "azimuth_speed_limit",   "max",                 (float) rpm2rads(3000.0)/$(azimuth_gear)  }
296
	# gear ratio between DT and servodrive
297
	{ "azimuth_speed_servo",   "gain",                (float)-$(azimuth_gear)          }
298
	# torque we allow the servodrive to actuate on the DT
299
	{ "azimuth_torque",        "value",               (float) 10.0              }
300
	# inverse gear ratio between DT and servodrive
301
	{ "azimuth_position_gain", "gain",                (float)-1.0/$(azimuth_gear) }
302
	# callibration value for position
303
	{ "azimuth_position_offset","value",              (float) 0.0               }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
304

305
306
	# positions were we go into safe behavior
	# these must be outside the normal operating range
307
308
	{ "azimuth_safety",        "position_min",        (float) deg2rad(-290.0) }
	{ "azimuth_safety",        "position_max",        (float) deg2rad(290.0)  }
309
310
	# 'safe zone' is between the operating range and the absolute safety
	# value above
311
312
	{ "azimuth_safety",        "safe_zone_min",       (float) deg2rad(-280.0) }
	{ "azimuth_safety",        "safe_zone_max",       (float) deg2rad(280.0)  }
313
314
	{ "azimuth_safety",        "safe_zone_min_speed", (float) rpm2rads(-0.001) }
	{ "azimuth_safety",        "safe_zone_max_speed", (float) rpm2rads(0.001)  }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
315
	{ "azimuth_safety",        "emergency_torque",    (float) 3.0           }
316
	# we do not start in recovery mode
Jeroen Vreeken's avatar
Jeroen Vreeken committed
317
	{ "azimuth_safety",        "recover",             (int)   0  		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
318
	
319
        { "elevation_input_matrix", "constants",          (float) { 0.5/$(elevation_gear), -0.5/$(elevation_gear) },
320
                                        	          (float) { 1.0/$(elevation_gear),  1.0/$(elevation_gear) } }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
321

322
323
	{ "elevation_output_matrix", "constants",         (float) { $(elevation_gear),  $(elevation_gear)/2.0 }, 
							  (float) { -$(elevation_gear), $(elevation_gear)/2.0 } }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
324
325

	{ "elevation_spg",         "setpoint",            (float) 0.0           }
326
	{ "elevation_spg",         "max_x",               (float) deg2rad(90.0)   }
327
	{ "elevation_spg",         "min_x",               (float) deg2rad(-0.05)  }
328
	{ "elevation_spg",         "max_v",               (float) rpm2rads(2100.0)/$(elevation_gear) }
329
330
331
332
333
	{ "elevation_spg",         "max_a",               (float) 0.0003   	}
	{ "elevation_spg",         "max_j",               (float) 0.000016	}
	{ "elevation_spg",         "precision_x",         (float) 0.000001      }
	{ "elevation_spg",         "precision_a",         (float) 0.000001      }
	{ "elevation_spg",         "precision_v",         (float) 0.000001      }
334
	{ "elevation_servo_state", "max_x",               (float) deg2rad(90.0)   }
335
	{ "elevation_servo_state", "min_x",               (float) deg2rad(-0.05)  }
336
	{ "elevation_servo_state", "max_v",               (float) rpm2rads(2100.0)/$(elevation_gear) }
337
	{ "elevation_servo_state", "max_a",               (float) 0.0003   	}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
338
	{ "elevation_torsion_spg", "setpoint",            (float) 0.0           }
339
340
	{ "elevation_torsion_spg", "max_x",               (float) 0.00          }
	{ "elevation_torsion_spg", "min_x",               (float)-0.00          }
341
	{ "elevation_torsion_spg", "max_v",               (float) rpm2rads(0.001) }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
342
343
344
	{ "elevation_pid",         "kp",                  (float) 0.80     	}
	{ "elevation_pid",         "ki",                  (float) 0.001  	}
	{ "elevation_pid",         "kd",                  (float) 0.001   	}
345
346
347
348
	{ "elevation_pid",         "maxw",                (float) rpm2rads(0.002)  }
	{ "elevation_pid",         "minw",                (float) rpm2rads(-0.002) }
	{ "elevation_speed_limit", "min",                 (float) rpm2rads(-0.08)  }
	{ "elevation_speed_limit", "max",                 (float) rpm2rads(0.08)   }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
349
350
351
352
353
	{ "elevation_jerk_limit",  "min",                 (float)-0.003         }
	{ "elevation_jerk_limit",  "max",                 (float) 0.003         }
	{ "elevation_torsion_pid", "kp",                  (float) 0.2  		}
	{ "elevation_torsion_pid", "ki",                  (float) 0.0  		}
	{ "elevation_torsion_pid", "kd",                  (float) 0.0 		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
354
355
	{ "elevation_torsion_pid", "maxw",                (float) 0.0001 }
	{ "elevation_torsion_pid", "minw",                (float)-0.0001 }
356
357
	{ "elevation_torsion_speed_limit", "min",         (float) rpm2rads(-0.001) }
	{ "elevation_torsion_speed_limit", "max",         (float) rpm2rads(0.001)  }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
358
359
360
361
362
363
364


	{ "elevation_safety",      "safe_zone_min_speed", (float)-30  		}
	{ "elevation_safety",      "safe_zone_max_speed", (float) 30  		}
	{ "elevation_safety",      "torsion_max",         (float) 0.0002 	}

	{ "elevation_safety",      "recover",             (int)   0  		}
365
	{ "elevation_safety",      "torque_max",          (float) 20.0		}
Jeroen Vreeken's avatar
Jeroen Vreeken committed
366
367
368
369
370
371
372
373
	{ "elevation_safety",      "emergency_torque",    (float) 3.0 		}

	{ "elevation_torque_r",    "value",               (float) 10.0          }
	{ "elevation_torque_l",    "value",               (float) 10.0          }
	{ "elevation_torsion_torque_lp", "tau",           (float) 10.0          }
	{ "elevation_position_offset_r","value",          (float) 0.0           }
	{ "elevation_position_offset_l","value",          (float) 0.0           }

374
375
376
377
378
	{ "elevation_safety",      "position_min",        (float) deg2rad(-0.1) * $(elevation_gear)  }
	{ "elevation_safety",      "position_max",        (float) deg2rad(90.5) * $(elevation_gear)  }
	{ "elevation_safety",      "safe_zone_min",       (float) deg2rad(-0.09) * $(elevation_gear) }
	{ "elevation_safety",      "safe_zone_max",       (float) deg2rad(90.4) * $(elevation_gear)  }
	{ "elevation_safety",      "torsion_recover_max", (float) deg2rad(1.0) }
Jeroen Vreeken's avatar
Jeroen Vreeken committed
379
}
380
381
382
383

# Load file with calibration parameters.
# All parameters above should not be subject to calibration.
include "dt_ctrl.param"